Pet fountains are the best way to ensure that your pets are possibly getting the cleanest water for drinking. They also relieve you of water worries when you are at work or out of town. But most of the pet fountains are not maintenance free. Most models, like the Drinkwell 360 Stainless, come equipped with charcoal filters that need to be replaced to keep them free of bacterias. Water levels need to be maintained clean in all units and pet fountains also need to be cleaned regularly to remove dirt such as debris, hair, fur and food.
These are some ways to clean your pet fountains:
You must change the fountain charcoal filter at least once a month. This is if you have charcoal filter. Double check it , flip the unit over and look for a well housing. The well housing will have a small door on it that can be easily opened. Slide the old filter out and just pop the new one. Clean the filters in a warm water rinse between the replacements. Pet fountains have a motor that is powered by an electrical source.
The motor needs to be cleaned to keep it away from burning out. The motor can be washed in a warm, soapy water and left out to air dry it.
Then, place the main part of the fountain in the sink and clean it with soap and water. Use a sponge to remove all the stains. Try not to submerge the pet fountain in a sink that is full of water. Simply give it rinse, clean it with the soapy water and give it a final rinse. Allow the fountain to dry. Replace the motor and fill the fountain housing and bowl with a water. The best pet fountain can now be placed in its proper location. Plug the pet fountain into a the power outlet. Then set the water flow rate and refill with water when it is needed. You can use a sponge for spot cleaning the pet fountain between deep cleanings. And then you’re done.